New MAX Machine cartridge

Did I say that I wasn’t going to buy the MAX Machine games? Just be happy with the MultiMAX and skip the hunt. But, well the box art is so unique, and I guess I love the hunt. So this makes my fifth MAX Machine boxed game. I had been monitoring this auction on Yahoo Auctions for about a year – a new old stock Wizard of Wor for 9800 yen (about $98USD). Too much, too much, I thought.

And it really is. But one day someone shared a link about the far more common Commodore 64 version being listed on eBay, used and without box or manual, for $100. So suddenly the MAX Machine auction in question seemed like a much better deal. And even if I find another comparable version that starts at a lower price someday, it could take years and only end up slightly cheaper than this one. So I took the plunge.

The real kicker*? The same seller has listed a new old stock Kickman for MAX Machine for 14,800 yen!
(*see what I did there?)

 

Yahoo Auctions

I have been listing some Commodore items on Yahoo Auctions since June 2017.

I decided to do this because I wanted a Commodore 128, but when I searched Yahoo Auctions, there was only one, it had a busted key, and the guy wanted about $1000 for it (it did come with a 1571, but still…). I reasoned that I could buy a Commodore 128 from the US and have it sent here for about 20% of that price. And I thought there may be some collectors out here that would appreciate a little competition in the market.

Reality is, not nearly as many people are interested in Commodore out here as I thought. But it’s been a good experience so far listing and being able to speak to local collectors.

If you’re in Japan and have a request for something, you can contact me directly.

My current listings.

Moving

I mentioned that my room is very small compared to the places I’d lived in the US. As you can see from the picture, I have two desks, one for retro stuff and one for my main PC. To switch from one to the other, I turn the chair around and roll forward about one and a half steps. Kinda convenient but everything is so tight! And my bed basically brushes up against the chair most of the time.

Besides the desks and computers, there’s also a small set of drawers next to my main PC, which holds stuff that I plan to auction, and a rack next to that which holds my projector and my Plus/4 box. Behind the Commodore desk, you can’t see, but there’s a narrow book rack that I use to hold my joysticks and cartridges. And the rack on the Commodore desk is so cheap and flimsy, and tangled up in the monitor stand, that it’s a real hassle to switch out computers and use one of the others.

In other words, just no space!

But that’s all about to change! I am moving. Still within Japan, and actually still within the same city, but my wife and I have decided to buy a house. It has about 40% more space than my current apartment, and I will have about half of one room dedicated to the computer collection! I’ll probably end up getting one or two additional computers, but mostly I am going to take the opportunity to spread out a bit and enjoy some space!

MAX Machine is alive!

It’s of course always great to know someone in your vicinity who is a Commodore fan, but in Japan, that’s quite a tall order! Fortunately, I live just outside of Tokyo, so there are a lot of people nearby, so at least one of them was bound to like Commodores, too. By chance, I learned that someone else from the Commodore 64/128 Facebook group lives in central Tokyo. We met over beers the first night, talked a bit about this and that, including Commodores, and we have been in regular touch ever since.

This friend knows how to solder, and I have no valuable skill to offer in return, so that’s great. We met on Monday this week and did assorted troubleshooting, and while we were at it, we performed the previously mentioned “one-wire mod.” And by we, I mean he, of course. Pretty sure I learned a bit about technique by watching him, though.

The idea is pretty simple: the VIC-II outputs to the RF adapter, so we steal that signal and re-route it to the audio jack. Since the audio jack port has two output channels available, but is only using one (sort of*) it can handle the video, no problem.

and there you have it!

*Mine required a bit more work, as I had a “revision B” motherboard, which actually uses the second audio channel, but not for anything the MAX Machine can actually take advantage of. We had to remove a capacitor to retake control of the second audio channel. It was for audio input, so perhaps they planned for the possibility of using that in future software, but the machine’s history was cut short.

I have Avenger (Space Invaders clone) and Music Composer as native MAX Machine cartridges, and was pleased to learn that some of my other cartridges from my Commodore 64 also worked: Jupiter Lander, Visible Solar System, Radar Rat Race, Kickman, and Sea Wolf. After reading up on things, I’m not sure why my Omega Race cartridge doesn’t work on my MAX Machine, but it doesn’t.

 

 

 

 

 

 

There may still be room for improvement in video quality. The attached photos look pretty good, but there is a ghosting effect that the photos aren’t showing. There may be some adjustment I can make within the RF adapter, or if I feel ambitious with the soldering iron, I can even alter the “single-mod wire” to a two-wire mod and create an S-video connection. But for the time being, I’m totally thrilled to have this piece of Commodore history up and running!

 

 

 

Commodore 128

I enjoy taking unique photos, but I’m not very refined at it. Fake it until you make it, I guess.

This is my day-driver in the Commodore world. I searched out a nice-looking Commodore 128 at a reasonable price. I’d say I did a good job; the case and keyboard are nearly immaculate. The price was not cheap, but nothing for me ever is after shipping, and this was definitely in the “not bad” range. Look at this beauty:

Just look at it!

However, the one I bought is an NTSC model. Growing up in America before the Internet became mainstream, you could easily never know that NTSC was a disadvantage. Since I was in an NTSC region, everything related to video that I owned was NTSC-compatible, and all software in the stores were written with NTSC compatibility in mind. And it never ever seemed like a problem; walk into Target and see a hundred games ready to go with your system. Walk into an actual software shop and there could be double or triple. Actually, I talk about it as if I felt it wasn’t a problem, but I’m pretty sure I never even knew about NTSC, much less PAL, when I was growing up.

But the landscape is quite different now. Here I am, actually still in an NTSC region, but with access to the Internet. And being such an old technology, copyright is kinda ignored and you have basically unfettered access to mountains upon mountains of software. And when this happens, you start to realize that a lot of it doesn’t work, and you may wonder why. And the reason is that much much more software was written for PAL.

So I bought another Commodore 128, this time from the UK, thus PAL. And I received it, but it wasn’t nearly as nice looking. Sticker residue was the real eye-sore, and of course that will clean up, but on top of that, it was a little yellowed and quite a few keys had small nicks on them. Not wanting to trade my beauty of a 128 for a beat-up one just for access to more software, I exchanged one motherboard for the other. Pretty straightforward process, just a few screws to open the case, two cables and a ground wire to disconnect top from bottom, and a few screws to release the motherboard, repeat, and reverse. Tidy. Now I have a nice-looking AND highly compatible Commodore 128! And now that I think about it, I also have a not-so-nice looking and not as compatible Commodore 128! It lives in the closet until I get around to cleaning it up and selling it.

And here it is all set up with SD2IEC and Datassette.

So, why a Commodore 128 instead of a Commodore 64? That’s the more typical choice, right? Well, my first computer was actually a Commodore 64, but I didn’t buy that myself, and it was used entirely for games. After a couple of years, I bought my own Commodore 128 at a garage sale. Sure, it was used, but it was my own money. And it was purposed not only for games (but believe me, there were games) but also for school. Not every teacher at the time would accept a printed paper, but quite a few did, and each paper got input on that system. I feel I did a lot of growing up on that system, so it remains the more nostalgic of the two for me.

The Commodore 128 is also a much more sophisticated system. The CPU was faster by nearly double the speed. There was double the memory. The included version of BASIC was much more featureful. It output at double the resolution, if you had the right hookups. There was a second CPU that could load CP/M programs. And there was almost no software to take advantage of any of this! Is what people like to say. But actually there were a substantial number of apps that could take advantage of these features. What the Commodore 128 was lacking was games.

This is the rear view, where you can see there are two (actually three, but one doesn’t really count) possible video outputs. The one labeled video is for 40-column video, but the RGBI can output at 80-column, and they can even be run at the same time.

But inside every Commodore 128 is 99.9% of a Commodore 64. It was nearly 100% compatible with Commodore 64 apps and games. So while it can be thought of as its Achilles’ heel, because software developers just kept producing Commodore 64 games since the Commodore 128 could also play them, in retrospect another perspective is possible. Commodore 128 native for productivity and the very seldom game, and Commodore 128 in Commodore 64 mode for serious gaming. I’ve heard there are games that aren’t compatible with the 64 mode of the Commodore 128, but I’ve never personally loaded one that doesn’t work. I believe I was given one specific title that doesn’t work, and if that game is a must-have, well, I suppose the 128 isn’t for you. But for me it’s the dream machine!

Someday, I hope to use this for actual productivity again. It won’t browse the Internet or display PDF files, but I can use it to type documents and print them, and I can use it to telnet, which could allow me to connect to a modern PC which I can use SSH from, which could make it quite accommodating to do work on. But for now, it’s getting serious use as a gaming machine!

Love love love these fake leather dust covers!

Plus/4

This is is the story of how I ended up getting a LITTLE carried away on the Plus/4 aisle…

After I bought my Commodore 128, I thought I would take things nice and slowly and enjoy collecting a few Commodore computers. But probably two days later, I found a Commodore Plus/4 on eBay, described as “Probably never been used.” Could be true. As often happens with vintage computers, the box isn’t in perfect condition, regardless of its status as a possibly “unused” computer. When I received it, I plugged it in and it came right up – a good sign! But I did run into a problem.

less-that-perfect condition box

What makes the Commodore Plus/4 most unique in the Commodore 8-bit series is that it comes with a built-in office suite. “What?” you say. “A built-in office suite?” Yes, actually, a built-in office suite that loads in about one second at the touch of a button. And it’s able to multitask in a windowed environment. It can share data between its applications. All within 64KB of RAM. Sounds impressive, right?

Well, it might be more accurate to say it can kind of multitask. And it kind of has a windowed environment. And it can kind of share data between its applications. So perhaps it’s best to say it’s kind of impressive. The software takes a lot of heat for its user interface, but really, I still find it somewhat amazing, despite its limitations. Seems you’re typing in a command every four seconds or so, sure, but for a machine released in 1984, to technically be able to do all of the things above, at speed, is no small feat. But to be reasonable, it is lacking in ease-of-operation.

Anyway, the problem I encountered was that, while the Plus/4 initialized correctly, the built-in office suite did not load. I had to replace one of the integrated software ROMs. How did I do that? Well, I could have just bought the target chip, but I found another “unused I think” Plus/4 on eBay for a reasonable price, so I went for it. This one had other intermittent problems, but the integrated software ROM worked a treat in my main Plus/4. So to repair the second Plus/4, I bought a third Plus/4 and so on. And if you think I’m exaggerating…

I’m not!

So what’s the hardware like? Well, it’s night and day compared to the Commodore 64. Unlike the Commodore 128, it is not the least bit compatible with Commodore 64 software. This is unavoidable due to a different CPU, different graphics and sound processor, and many other changes. But here’s the real kicker – it’s also incompatible with many Commodore 64 devices! Look at the ports on the back:


So from left to right, we have:
– a new power connector (mostly not a problem because the system comes with its own power supply, but at the same time, definitely a problem because that connector is proprietary and makes after-market power supplies much tougher to come by.
– the same old serial port. So that’s nice, you can use your old C64 disk drive, if you can live with the shame of a black computer and a brown disk drive. You really need to get the 1551 so you have matching pieces. And you can use many printers, but if it has a connector that connects to the tape drive port, you’re kinda out of luck, because…

 

– a new tape drive port. This is bad news for a lot of people – you couldn’t immediately bring over your tape drive. Had to get a 1531! Or wait until the tape adapter became available.

new 1531 tape drive for use with Plus/4 and the new plug

– the same user port.
– a new cartridge port. This also doesn’t matter that much, because even if it was the same port, the software wouldn’t be compatible, anyway.
– new joystick ports. Because of course.
– the same video cable. At least you didn’t have to buy a new monitor!


power adapter and joystick adapter.

Another difference visible along the perimeter of the case is the reset button on one side of the machine. And for all their differences, both the C64 and Plus/4 are interested in giving you terrible quality video output through the identical RF connector on the other side of the machine.

Even more strikingly different is the keyboard. The keys are stark white, and they replaced the two-key (up/down and left/right with shift) cursor movement setup with a set of four dedicated directional arrow keys that are actually shaped like arrows. Restore is gone in favor of a second control key, an escape key appears, and the function keys have all moved along to the top of the keyboard, and includes a dedicated “help” button.

This was a radical step away from Commodore’s previous design aesthetics. I think this is a beautiful machine!

MAX Machine

My first foray back into Commodore collecting was this semi-rare machine by Commodore Japan. Pretty sure it was my first Yahoo Auctions purchase (Japan is the sole country where eBay lost the online-auction war so Yahoo Auctions still prevails here). The price fluctuates wildly; I’ve seen untested units without box or power supply go for as little as ¥15,000, and I’ve seen unused units or good condition units with multiple boxed games go for as high as about ¥70,000 ($150-700 or so). Games average about ¥5000 in their boxes. I see about three or four of these machines a month, although sometimes there is a dry spell where only one or two overpriced units are available and don’t sell.

Mine was midrange in price, at about ¥32,000, including two cartridges: Music Composer (boxed, okay condition) and Avenger (loose). It includes a box, but the box is not in good condition at all, so I kind of want to get rid of it. With such limited space, I only want to keep boxes if they’re in really good shape. But I can’t bring myself to throw it out.

box front

box back
(actually I have no idea which is front and back)

MAX Machine is a tremendously stripped down version of a Commodore 64, although the two machines are definitely related. Some key similarities: they both have a SID chip, both have a VIC-II chip (although they’re not compatible VIC-II chips), and a handful of their cartridges are compatible with one another. If you remember the Commodore-branded C64 cartridges like Radar Rat Race, Jupiter Lander, and Kickman, usually very simple games, they were often originally released on the Commodore MAX Machine, developed by Japanese software developer HAL Laboratory.

Cosmetically, it has nearly nothing in common with the Commodore 64, although the keyboard layout is the same. Let’s have a look:


main system

For starters, there was a clear color palette difference. The first run of Commodore 64s had a grayish case (later tan) with brown keyboard and white lettering, the MAX has a kind of futuristic-looking black and silver design with red accents. And the keyboard itself is a membrane type, compared to the C64’s full-travel keyboard.

Around the perimeter also holds some differences. One thing I consider a big plus is that the MAX Machine had one joystick port on each side. ON. EACH. SIDE. Behold!

Oops! You can’t see anything because they’re pretty deeply recessed. But trust me, there’s a port on each side and it’s great because then the joystick cords don’t get tangled and you don’t have to worry about sitting so close to the computer if you’re sitting on the opposite side of the joystick ports, as you do with the Commodore 64. As if I have anyone to play with, and if I did, as if we’d choose to play Radar Rat Race, right?

The back has some familiar (inter)faces.

system rear

If the power connector looks a little too much like the C64 power connector for comfort, that’s because they’re the same. No MAX Machine power supply but got a C64 one? You’re in such luck; you can MAX Machine. Power switch is up/down, also like the C64. The audio port is unique; despite only having an RF port for video as opposed to a dedicated video port as the C64 had, they nonetheless decided to provide an audio port. For reasons explained later, this is actually tremendously (albeit accidentally) useful. Cartridge port. Although only a handful of games are compatible, the port itself is the same as the C64’s. Standard RF channel selector and jack. Only difference is that instead of channel 2 or 3 in the US, it’s channel 1 or 2 in Japan (sorry, NHK). And the cassette port is also the same as a C64’s. So if you have a C64 setup, a MAX Machine can take advantage of a few things you may have lying around.

But the MAX Machine provided a bit of a challenge when trying to function in today’s more sophisticated world. Can’t just take it and plug it into a modern television (mine has only a digital tuner, while the signal is analog) and since there’s no video port, you can’t even connect it to an RCA jack. At first, I could only confirm that the machine worked by plugging in headphones to the audio port, plugging Avenger into the machine, and guessing that F1 would start the game. I heard noises (putt. putt. putt. putt. POOOSH!), so I felt somewhat relieved that it was at least partially functional. Don’t be disappointed, this is not the aforementioned “tremendously useful” feature of the audio port. Although, don’t get me wrong, producing audio is awfully useful!

No, definitely, the first thing you should do with a MAX Machine is perform this so-called “single-wire” mod. You route the video signal from the VIC-II to the unused pin of the monophonic MAX Machine’s stereo jack, and voila, single-channel audio and video are now available on the audio port. Grab a stereo Y-cable and connect to an RCA AV jack and you’re up and running! This is the tremendously useful feature of the audio port, so please be excited now.

However, I don’t know how to solder (yet?), so I have to wait a bit. For now, this remains a visual curiosity in my collection.

Who I am, where I come from, and where I am now

I’m Sean. I grew up in the 80s, with a deep fascination with computers. My first experience with computers was at my aunt and uncle’s home. They’d recently acquired the first computer of anyone in my extended family – a Commodore 64. Until I saw that computer, the closest experience I’d had was playing my Atari 2600. A keyboard was a fascinating way to interact with an entirely new world of electronics. I was hooked. My family couldn’t really spare the cash to just buy a computer, so my mother encouraged me to save money from my modest income, which I earned by helping her fold gowns from my uncle’s physical therapy practice. After about a year, I’d saved enough to buy a Commodore 64 of my own.

But I didn’t have to. At almost the exact same time, my father’s boss decided to upgrade from his Commodore 64 to a PC. So he gifted me his system – a Commodore 64, a 1702 monitor, a 1541 disk drive, a joystick, and The Bard’s Tale. There were probably a few other things included, but that was my main memory of it. I also remember going to Target the next day and buying a two-pack of games – Frogger (if you have to ask…) and Threshold (a space shoot-em up game).

I grew up in California, where I had something that I wouldn’t really appreciate until later in life – space. Ample space. More on that later, but it afforded me the luxury of my own room and a place to hide out and play with my computer setup. This was a major factor in shaping me during my formative years. Namely, I became a hermit and an introvert! With so much time to fill, RPGs were a natural match for me, and I quickly became a completionist. I spent many hours until the sun came up, looking for every last item, every tiny detail, and every exploit that RPGs of the time allowed (or didn’t prepare) for.

I moved into my own apartment in my early 20s. It was an unbelievable location – a huge loft directly over the office I worked at, and I was permitted to live there rent-free, in exchange for being on call 24/7. My boss was a nice guy, though, so rarely called on me at indecent hours, such as 9 in the morning. In that apartment, I entered my most aggressive phase of computer collection, with about thirty vintage computers, all set up and working, either with a dedicated monitor or a couple of computers near each other that would share a monitor.

Fast forward another ten years, and I found myself a pretty changed person. I’d given up the computer collection in favor of arcade games (had about twenty-five – space is so good!). I was more social; I had started enjoyed going to dance clubs, having house parties, etc. But perhaps most surprisingly, I’d made the decision to move to Japan.

So that’s where I am now. I love it out here. It’s quite safe, it’s comfortable, it’s convenient, and the food is delicious. I have a beautiful and understanding wife. I have a healthy and sometimes rambunctious but (usually!) kind son. But there’s one thing I didn’t have: a vintage computer. So after being out here for seven and a half years, I changed that. I joined Yahoo Auctions (no eBay out here).

You can take a horse to water, but you can’t make an overnight MSX fan out of a Commodore fan. A Commodore guy in Japan, I joined a very niche market with high price tags and limited availability. But Commodore had a Japan division, so things are also kind of interesting. I started my new 8-bit journey with a Commodore MAX Machine – a completely unique looking machine from the Commodore Japan 8-bit line. It was released at the same time as the Commodore 64 was released in Japan, but it was a far more limited machine. You can find details about that in the MAX Machine posts.

So I lied, there’s a second thing I don’t have out here… a lot of space. So that’s kind of what this blog is about. Being a Commodore fan in Japan, details about my acquisitions, and the torture I put myself through just to fit it all in my room.